Fabrication of extreme wettability patterns with water-film protection for organic liquids

Selective fabrication of superhydrophilic (S-philic) region on a superhydrophobic (S-phobic) surface requires complex technology and high cost, which has limited applications of extreme wettability patterns. In this paper, a twice-chemical-etching approach without special modification is used to prepare the extreme wettability patterns. Superhydrophobicity and superhydrophilicity can be successfully achieved after twice chemical etching for 20 seconds. The obtained patterns can maintain their extreme wettability for at least 30 days. Functional platforms with single-S-philic and multi-S-philic regions are fabricated to manipulate water and various organic liquids with water-film protection in an air environment.     

Improving dispersion and integration of single‐walled carbon nanotubes in epoxy composites by using a reactive noncovalent dispersant

Uniform dispersion and strong interfacial interaction are two critical prerequisites for application of single‐walled carbon nanotubes (SWNTs) in polymer composites. To endow the composites with multifunctional feature, no damage on the chemical/electronic structure of SWNTs is also usually required. With these ends in view, two epoxide‐containing pyrene derivatives (EpPys) were designed, synthesized, and used as reactive noncovalent dispersants for developing multifunctional epoxy/SWNT composites. One having longer chain length between epoxide group and pyrene moiety, that is, EpPy‐16, shows higher dispersing efficiency and provides the nanotube dispersion with better stability, thus picking up for subsequent studies. Systematic characterization on SWNT/EpPy‐16 hybrid demonstrates that 13.2 wt % of EpPy‐16 is adsorbed on the SWNT surface through strong π‐stacking interaction, and intrinsic electronic structure of SWNTs is basically reserved. The solution‐based process adopted here preserves the good SWNT dispersing state in dispersion into the composites. Simultaneously, enhanced interfacial interaction is also realized by using EpPy‐16, which interacts noncovalently with SWNT but connects covalently to epoxy network. As a result, the composites acquire 37 and 22% increments in tensile strength and Young's modulus, respectively, relative to that of neat resin. A low‐electrical percolation threshold of 0.1 wt % SWNTs and improved thermal properties were also observed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Toward the Rational Design of Galactosylated Glycoclusters That Target Pseudomonas aeruginosa Lectin A (LecA): Influence of Linker Arms That Lead to Low‐Nanomolar Multivalent Ligands

Anti‐infectious strategies against pathogen infections can be achieved through antiadhesive strategies by using multivalent ligands of bacterial virulence factors. LecA and LecB are lectins of Pseudomonas aeruginosa implicated in biofilm formation. A series of 27 LecA‐targeting glycoclusters have been synthesized. Nine aromatic galactose aglycons were investigated with three different linker arms that connect the central mannopyranoside core. A low‐nanomolar (K_d=19 nm , microarray) ligand with a tyrosine‐based linker arm could be identified in a structure–activity relationship study. Molecular modeling of the glycoclusters bound to the lectin tetramer was also used to rationalize the binding properties observed.     

Scheme for implementing quantum dense coding with four-particle decoherence-free states in an ion trap

This paper proposes an experimentally feasible scheme for implementing quantum dense coding of trapped-ion system in decoherence-free states. As the phase changes due to time evolution of components with different eigenenergies of quantum superposition are completely frozen, quantum dense coding based on this model would be perfect. The scheme is insensitive to heating of vibrational mode and Bell states can be exactly distinguished via detecting the ionic state.     

Optimal intracellular calcium signaling

In many cell types, calcium is released from internal stores through calcium release channels upon external stimulation (e.g., pressure or receptor binding). These channels are clustered with a typical cluster size of about 20 channels, generating stochastic calcium puffs. We find that the clustering of the release channels in small clusters increases the sensitivity of the calcium response, allowing for coherent calcium responses at signals to which homogeneously distributed channels would not respond.     

Singlet-triplet splitting of geminate electron-hole pairs in conjugated polymers

The singlet-triplet splitting of geminate polaron pairs in a ladder-type conjugated polymer has been studied by the thermally stimulated luminescence technique. The energy gap separating the singlet and triplet states of the geminate pairs is measured to be in the range of 3-6 meV, depending on the polymer morphology. The results of correlated quantum-chemical calculations on a long ladder-type oligomer are fully consistent with the observed values of the geminate polaron pair singlet-triplet gap. Such low splitting values have important implications for the spin-dependent exciton formation in conjugated polymers.     

Optical properties of singly charged conjugated oligomers: a coupled-cluster equation of motion study

We have implemented a coupled-cluster equation of motion approach combined with the intermediate neglect of differential overlap parametrization and applied it to study the excited states and optical absorptions in positively and negatively charged conjugated oligomers. The method is found to be both reliable and efficient. The theoretical results are in very good agreement with experiments and confirm that there appear two subgap absorption peaks upon polaron formation. Interestingly, the relative intensities of the polaron-induced subgap absorptions can be related to the extent of the lattice geometry relaxations.     

全光纤激光相干合成光谱响应特性研究

基于N-腔镜谐振腔理论对全光纤激光相干合成进行了理论分析，数值模拟了迈克尔逊型相干合成激光器的光谱特性，对两个光纤Bragg光栅的中心波长差和两路光的光程差对合成光谱特性的影响给出了理论解释.用啁啾光纤光栅取代其中一个光纤Bragg光栅，使激光相干合成的带宽由0.3 nm拓展到1.0 nm.     

Collimation testing using a circular Dammann grating

A novel technique for collimation testing with a circular Dammann grating is proposed. When the beam under test is incident on a one-order circular Dammann grating with limited aperture, double-humped radial rings will be generated at the back focal plane of a focusing lens. If the beam is collimated, the separation between the two rings will reach its minimal, otherwise the two rings will be apart from each other. Therefore, the degree of collimation of the tested beam can be estimated from the separation. The principle and experimental results of the method are presented. Owing to the simplicity and low cost of the method, it is a promising method for quickly checking the collimation of a laser beam.     

Negative Refraction and Near-Field Imaging of an Elliptical-Rod Photonic Crystal Slab in the Second Band

Negative refraction and imaging properties of the electromagnetic wave through a two-dimensional photonic crystal （PC） slab, which consists of a square lattice of elliptical dielectric rods immersed in the air background, is studied by the plane-wave expansion method and the finite-difference time-domain method. A point source placed in the vicinity of the PC slab can form a good-quality image spot through the PC slab for the incident frequencies within the second photonic band. The calculated result also shows that negative refraction occurs in this kind of PC slab.